wheelchair and scooter ramps

lightweight fibreglass Ramps

Where weight is an issue, this highly successful, exclusive range of lightweight fibreglass ramps is the ideal solution, offering both strength and minimal weight, thus making it ideal for situations where it needs to be moved on a regular basis, i.e. by retailers and other service providers. Unfolding along its length to form a single platform, it is ideal for both 3 and 4 wheeled scooters, manual wheelchairs and powerchairs.

Manafactured from non-corrosive glass reinforced plastic, these broad access mobility ramps are ideal for wheelchairs or scooters, and have a non-slip surface. Lightweight, portable, quick and easy to use, they can also be used for permanent installations. Maximum user weight of 40 stone (250kg). Available with and without handrails.

folding threshold ramp

Features
This ramp provides a complete access solution for any threshold. The height of the ramp is adjustable from 8cm (3") to 18cm (7") and the entry/exit ramps provide a smooth transition. The ramp is foldable and easily stored or transported when not in use.

Technical Specification

• Adjustable Height 8cm (3") to 18cm (7")

• Length: 1.2m (47")

• Width: 66cm (26")

• Weight: 10kg (22lbs)

• Max User Weight 40st (250kg)

lightweight folding briefcase ramps

Features
These lightweight fibreglass scooter ramps are designed to be used for loading 3 or 4 wheel scooters and wheelchairs into vehicles as well as other access situations. The ramps fold in half and has a carry handle like a briefcase.

Technical Specification

• Width: 33" (84cm)

• Track width: 30" (75cm)

• Weight: 3' - 18lbs (8kg); 4'6" - 24lbs (11kg); 6' - 29lbs (13kg)

• Max weight capacity: 40st (250kg)

lightweight threshold ramps

Features
This lightweight threshold ramp is designed to overcome the majority of wooden and UPVC door frames whilst allowing the door to open and close as normal. Can be used for wheelchairs and scooters. The non slip surface, aids grip when moving on the ramp. As it is fully weatherproof, the ramp can be left in place permanently if required.

Technical Specification

• Ramp height: from 1 1/2 to 4 inch to suit your threshhold

• Width: 30" (76cm)

• Length: 3-5" - 17" (43cm); 6" - 36" (91cm)

• Weight: 4lbs (2kg)

• Max Load: 31st (200kg)

Telescopic Ramps

These telescopic two-piece ramps extend to 5’ or 7’ and have been designed for use with Manual Wheelchairs, Powered Wheelchairs or Scooters. Easy to use, lightweight with a slip resistant coating. Maximum carrying capacity 600lbs.

- Powerchair and Scooter ramp - 5'
- Powerchair and Scooter ramp - 7'

Dimensions when folded

5ft tele ramp 71 x 26 x 6.5cm
6ft tele ramp 100 x 26 x 6.5cm

aluminium folding suitcase ramps

Features
These easy to carry lightweight ramps offer a 30" wide non-slip suface. Designed for both wheelchairs and scooters, the hinged design makes them extremely simple to use. Available in 3 lengths.

Technical Specification

• Weight 3ft: 15lbs (7kg)

• Weight 4ft: 21lbs (10kg)

• Weight 5ft: 26lbs (12kg)

• Weight 6ft:

• Maximum total load: 43st (272kg)

new multi fold lightweight ramp

this Ramp has been designed for use with wheelchairs, powerchairs and scooters. The ramps can be used to obtain safe access to motor vehicles, buildings and other inaccessible locations.

• Lightweight aluminium construction

• Folds in half for ease of storage and handling

• Carrys like a suitcase when not in use

• Comfortable carry handles

• Anti-slip high traction surface

• Striking metallic colour finnish

• The ramps have a safe weight limit of 200kg / 31st

Ramps are a generous 76cm (30") wide and are suitable for PMVs of up to 70cm (27 1/2") in width. When folded out they are 184 (6ft) long.